Discover the comprehensive list of Cisco and Linksys star codes. See Telnyx guidance and requirements.
Cisco/Linksys Star Codes
| Star Code | Name | Action |
| *69 | Call Return Code | Calls the last incoming caller. |
| *07 | Call Redial Code | Redials the last outgoing call number. (Not in pap2t) |
| *98 | Blind Transfer Code | Begins a blind transfer of the current call to the extension specified after the activation code. |
| *66 | Call Back Act Code | Calls a busy line over and over automatically for 30 minutes. When the line becomes free, caller's phone will notify with a distinctive ring. |
| *86 | Call Back Dea t Code | Cancels a callback. |
| *05 | Call Back Busy Act Code | Starts a callback when the last outbound call is busy. (Not in pap2t) |
| *72 | Cfwd All Act Code | Forwards all calls to the extension specified after the activation code, if an extension is specified. |
| *73 | Cfwd All Deact Code | Cancels call forwarding for all incoming calls. |
| *90 | Cfwd Busy Act Code | Forwards all calls to a specified extension when your line is busy. |
| *91 | Cfwd Busy Deact Code | Cancels call forwarding for calls incoming when your line is busy. |
| *92 | Cfwd No Ans Act Code | Forwards unanswered calls to an extension specified. |
| *93 | Cfwd No Ans Deact Code | Cancels call forwarding of unanswered calls |
| *63 | Cfwd Last Act Code | Forwards the last inbound or outbound calls to the extension specified after the activation code. |
| *83 | Cfwd Last Deact Code | Cancels call forwarding of the last inbound or outbound calls. |
| *60 | Block Last Act Code | Blocks the last inbound call. |
| *80 | Block Last Deact Code | Unblocks the last inbound call. |
| *64 | Accept Last Act Code | Allows the last inbound call to ring through when do not disturb or call forwarding of all calls are enabled. |
| *84 | Accept Last Deact Code | Cancels the code to accept the last outbound call. |
| *56 | CW Act Code | Enables call waiting on all calls. |
| *57 | CW Deact Code | Disables call waiting on all calls. |
| *71 | CW Per Call Act Code | Enables call waiting for the next call. |
| *70 | CW Per Call Deact Code | Disables call waiting for the next call. |
| *67 | Block CID Act Code | Blocks caller ID on all outbound calls. |
| *68 | Block CID Deact Code | Removes caller ID blocking on all outbound calls. |
| *81 | Block CID Per Call Act Code | Blocks caller ID on the next outbound call. |
| *82 | Block CID Per Call Deact Code | Removes caller ID blocking on the next inbound call. |
| *77 | Block ANC Act Code | Blocks all anonymous calls. |
| *87 | Block ANC Deact Code | Removes blocking of all anonymous calls. |
| *78 | DND Act Code | Enables the do not disturb feature. |
| *79 | DND Deact Code | Disables the do not disturb feature. |
| *65 | CID Act Code | Enables caller ID generation. |
| *85 | CID Deact Code | Disables caller ID generation. |
| *25 | CWCID Act Code | Enables call waiting, caller ID generation. |
| *45 | CWCID Deact Code | Disables call waiting, caller ID generation. |
| *26 | Dist Ring Act Code | Enables the distinctive ringing feature. |
| *46 | Dist Ring Deact Code | Enables the distinctive ringing feature. The default is *46 |
| *74 | Speed Dial Act Code | Assigns a speed dial number. |
| *16 | Secure All Call Act Code | Makes all outbound calls secure. |
| *17 | Secure No Call Act Code | Removes security on all outbound calls. |
| *18 | Secure One Call Act Code | Makes the next outbound call secure. (redundant if all outbound calls are secure by default.) |
| *19 | Secure One Call Deact Code | Secure One Call Deact Code Makes the next outbound call not secure. (It is redundant if all outbound calls are not secure by default.) |
What is the purpose of the 69 Star Code?
The *69 Star Code is the "Call Return Code" which calls the last incoming caller.
How can I redial the last outgoing call number?
Use the *07 Star Code, known as the "Call Redial Code", to redial the last outgoing call number. Note: This is not available in pap2t.
What does the 98 Star Code do?
The *98 Star Code, or "Blind Transfer Code", begins a blind transfer of the current call to the extension specified after activating the code.